remote opc

i have application to make central scada through rsview32 from several station by remote opc server, i try to configure a local network by 3 stations for lab test,labtop and two pc each computer have rslinx gatway, each station can see the other gatway drivers,but just the labtop which i can see thier remot opc through the other two desktop,but the opc server on the two desktop cant't bee seen through the labtop. i ask if anyone can help me by the configuration of DCOM in the windows or any other configure TO COMPLETE MY APPLICATION

I recommend reviewing DCOM configurations that will enable your remote connections. Depending on your current operating system, select a document from the list below:

Configuring COM/DCOM for Windows NT or 2000
http://www.matrikonopc.com/downloads/613/whitepapers/index.aspx

Configuring COM/DCOM for Windows XP or 2003 (no service packs)
http://www.matrikonopc.com/downloads/612/whitepapers/index.aspx

Configuring COM/DCOM for Windows XP SP2 or 2003 SP1
http://www.matrikonopc.com/downloads/172/whitepapers/index.aspx

Let me know if you have any questions.

Wassim Daoud
Global Solutions Architect

DCOM settings

Hello,
DCOM can be a headache when using remote comms and applications.
Try This:
http://www.matrikonopc.com/download...scription.aspx?documentID=172&ref=whitepapers

You may have to register!

Colin

Hello,

And as a hint, after making changes to the DCOM configuration, restart the computer. The changes normally do not take place until restart and the OS does not inform you a restart is needed.

Good luck,

Mark
http://www.peakhmi.com/

Here's the link to the Rockwell Automation knowledge base article detailing the required settings:

http://rockwellautomation.custhelp..../5906/kw/rslinx remote opc server/r_id/109439