Modbus communication

roxtech

Member
R
Join Date
Mar 2008
Location
Township Lahore
Posts
198
Hi dears,
Is it possible to get data/reading from any instruments/display/wieghing indicator which have modbus communication ports on SCADA like WINCC, RSVIEW and intouch without connecting with PLC?
Best Regards,o_O
 
Yes, of course its possible depending on the driver availability in your SCADA system and device, we connect to around 300 standalone devices on our systems without a PLC in the system.
 

Similar Topics

Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
82
Voltimus
Voltimus
S
Modbus communication help
Hi all I need help on this As in my project used Schneider TM241 controller. Now I want to communicate Elite energy meter with controller by...
Replies
3
Views
163
Corsair
C
J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
187
jillgeorge18
J
A
FATEK modbus TCP communication fail with energy meter
Hi, i cant establish communication between fatek plc with an energy meter, both capable for modbus tcp, i did with modscan but fatek plc does not...
Replies
1
Views
151
plctobal
P
K
Problems with Micro820 communication as Modbus RTU Master
Hi Guys, I am a new member and this is my first post! I have a little PLC experience but it is mostly with siemens logo and using ladder...
Replies
4
Views
902
drbitboy
drbitboy
Back
Top Bottom