Wonderware Intouch 10 compatible with Window 7 Professional 64-bit?

sanger

Member
S
Join Date
Nov 2005
Location
Toronto
Posts
172
Our company is going to be rapidly replacing all versions of Windows with Windows 7 64-bit and they are not allowing us to exclude Scada systems from the upgrade.

Has anyone had any success running Intouch on Windows 7 64-bit or even in Windows 7 XP Mode?
 
Wonderware Intouch 10.1 sp2 will work fine. The only issue i've had is with historical trending, specifically to windows that have trends not displaying the pens properly. But if you run Intouch in compatibility mode for Vista SP2 it's fine. Drop me an email if you need further help.
 
Latest word from Wonderware is that 10.1SP3 will be released 6-12 weeks from today. Hoping for an earlier release but not counting on it.
 

Similar Topics

P
Wonderware intouch scada
Hi guys, I have experience with PLC to Excel etc...just starting on using intouch scada screens. I have an Excel sheet that uses mainly...
Replies
1
Views
178
NetNathan
N
M
PROBLEMA WONDERWARE INTOUCH V23 Y DASABCIP
Hola chicos. Tengo un problema con el driver de comucicacion dasabcip 5, y un plc controllogix v34, ya realice la comunicacion pero en ciertos...
Replies
2
Views
178
JeffStadnik
J
M
Wonderware Upgrading (from Intouch WindowMaker 9.5 to Intouch WindowMaker 23)
Hi, I am upgrading a Wonderware SCADA form version 9.5 to version 23. I am able to migrate all the graphic, but when to activate the runtime this...
Replies
8
Views
450
MuHaDa15
M
X
Wonderware InTouch v11.1 tag definition OPC UA
Hi all, I am using OI.GATEWAY.2 to communicate to the PLC using an OPC UA. I can see the tags using an OPC explorer connecting to the...
Replies
0
Views
212
xavisole125
X
D
Wonderware InTouch 10.1 Functions ScriptSDK
For a while, I have been working with InTouch 10.1. The problem I am currently facing is the need to implement certain functions that do not...
Replies
0
Views
496
Delorean12DMC
D
Back
Top Bottom