WinPLC v4.50,CPU315-SB

shaker Hosain

Member
S
Join Date
Mar 2010
Location
USA
Posts
31
I'm new on PLC's Speed7,I've installed WinPLC7, I need configuration CPU315-SB. but I didn't found it in Hardware configuration
is there any body could help me to add special library for this CPU to WinPLC v4.50?
thank you very much...
 

Similar Topics

M
Troubles with WinPLC coupled to C-More Micro HMI Screen
I have already synced the .MAP file containing all the tag names from the WinPLC to the C-More Micro software. Although I am using an older...
Replies
4
Views
4,317
cjh
C
M
WinPLC DIP switches
Does anyone know what the DIP switches are for on the Entivity Think & Do WinPLC? The manual shows them in the picture, then says: "Support of...
Replies
3
Views
4,511
msinclair
M
M
Real communication between S7300 CPU315 2DP AND OPC
I want to realize the communication S7 and pc by cable profibus or mpi I want to know the steps to that allows me to do it
Replies
0
Views
1,267
med ali haloui
M
J
Cpu315-2 pn/dp fault
good day everyone. right now i troubleshoot a STACKER MACHINE. the fault in the PLC CPU315-2 pn/dp is BF1 and SM fault. I check all the...
Replies
4
Views
2,066
jairus
J
D
cpu315-2dp + ET200M
Hello , I have the classical configuration of CPU315-2DP + 5 * ET200 , just long time did not work on this configuration , the switch of Profibus...
Replies
11
Views
2,629
dmardinly
D
Back
Top Bottom