WinCC flex KT1000

Hello ALL,

I have created a WinCC Flexible 2008 project and simulated the alarms and was working. When I transferred the project to a KTP1000 Basic Panel, the configured discrete alarms are not showing.
Any idea on what is wrong with my set-up?

Many thank for ALL helps

Nec

any advice?

i need

Is the KTP1000 connected properly? Can you read any other value?
What about posting some snapshots from your setup?


Kalle

I have connected plc with mpi. Conection is ok. Read write all value. For example,

db1.dbx45.0--->xx alarm
When i force db1.dbx45.0 ->1 cant se alarm on HMI.


Thanks for all helps