Controllogix to Honeywell TDC3000 interface

bpmarling

Member
B
Join Date
Feb 2011
Location
cumming ga
Posts
1
I am programming a Honeywell TDC3000 HPM Serial Interface to a Controllogix. I have the hardware for both sides. Does anyone have information on how to program the Honeywell serial interface, including the discrete and analog arrays, if arrays are utilized?
 

Similar Topics

O
Controllogix interface to Honeywell DCS - TDC3000
We have application using Controllogix and we want to read some data from TDC3000, what kind of interface that we can use? Modbus or DH+? Thanks...
Replies
0
Views
3,307
Osias
O
M
Using Honeywell Series A Cards with Controllogix
Hey all, I have a peculiar situation at work where we have a surplus of old Honeywell series A (C200-style) I/O and network cards new in box from...
Replies
2
Views
1,209
Motorjunkie
M
R
Sharing data with a AB Controllogix and Honeywell C300
I have the task of trying to get a AB ControlLogix to communicate with a Honeywell C300 controller. I did do some searching but really did not...
Replies
2
Views
3,403
Rob S.
R
A
ControlLogix PLC to Foxboro/Honeywell DCS Interface
Has anyone out here successfully interfaced a ControlLogix PLC with a Foxboro or Honeywell DCS? If any of these DCS's is to get data from the...
2
Replies
18
Views
20,054
JulDan
J
T
ControlLogix Redundancy Module Single Mode Fiber
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
84
Ken Moore
Ken Moore
Back
Top Bottom