I have a project using FTView 5.1, I can connect tag in controllogx by RSlinx OPC Server, but cannot communicate by RSlinx Enterprise(it can find the PLC path, but can not show the data in the graphic), Does Enterprise need special setting or license?
RSlinx OPC Server and Enterprise in FTView SE 5.1
- Thread starter wilsonzhu
- Start date
Similar Topics
Hello All,
I know it is possibile to access data from a PLC directly to excel using a OPC link through RSLinx...
Hello All,
I am going to try and lay out my situation as good as I can.
Scenario: We have sites in different location across US that's running...
Hey!
In my previous queries on how to handle an OPC server like RSLinx in the ArchestrA IDE galaxy, I have succeeded and the answer was to just...
Hey everyone!.
I would like to know how to use a third-party data server other than Wonderware, such as RSLinx server to integrate it into the...
Hi Experts,
I am using Matlab as an OPC DA Client to communicate with AB PLC rslogix5560. I can successfuly read from the PLC but when i try to...