Bit puzzled with these Zelio timers.
Say if I wanted to program a timed sequence in FBD eg
Output 1 on for say 1 hour then off
then output 2 on for say 1 hour then off,
then output 3 on for say 1 hour then off,
all idle for 1 hour
then cycle starts again etc etc.
It sounded easy to me, and I think I actually got it working on the simulator, but it looks like a "dogs dinner"
Should I use cyclic timers or on/off timers.
Anyone care to point me to a neat version of doing something similar.
Say if I wanted to program a timed sequence in FBD eg
Output 1 on for say 1 hour then off
then output 2 on for say 1 hour then off,
then output 3 on for say 1 hour then off,
all idle for 1 hour
then cycle starts again etc etc.
It sounded easy to me, and I think I actually got it working on the simulator, but it looks like a "dogs dinner"
Should I use cyclic timers or on/off timers.
Anyone care to point me to a neat version of doing something similar.
