Phoenix Fiber Module and CNB are Compaitble?

gherz817

Member
G
Join Date
Oct 2005
Location
PHILIPPINES
Posts
58
We have CLX PLC1 (with Phoenix Fiber Module OCX-CTN-85-D-ST, a CNB Module) connected to the Redundant CLX PLC2(with CNB Modules and SRM module thru 1786-RPFRL fiber repeater. We're having trouble to communicate the 2 PLCs with each other. Anyone has encountered this kind of CLX Setup?

Please help us.

Thank you.
 

Similar Topics

T
DH+ Over Fiber Via Phoenix Digital
Hello, I am still having issues with communicating over this DH+ network. Existing are 3 PLC5/40's, 1 SLC5/04 which will ALL show up on Linx when...
Replies
5
Views
2,929
Gil47
Gil47
T
Phoenix Digital OCM/OCX/OLC Fiber Network
Happy New Year! I have been dealing with an old existing fiber network for a few months now and totally forgot about bringing it up to the PLC...
Replies
4
Views
5,051
marsichs
M
JuNGLisT
-=| Problem with SLC 5/04, WonderWare, and Phoenix Digital Fiber Card |=-
Problem: Ever since we upgraded to fiber on our DH+ network, WonderWare has is giving us a communication status alarm from each PLC. The alarms...
Replies
3
Views
9,772
JuNGLisT
JuNGLisT
A
Phoenix Contact Interbus RFC 430 2730190
I am stuck on fail ctrl error 1013 cannot get IP nor can do firmware update need help pls urgent
Replies
0
Views
170
abdullah333
A
N
Phoenix Contact Ethernet Switch Password
Hi, I'm working with a Phoenix Contact FL NAT 2304-2GC-2SFP Ethernet switch, I already set the IP address and it has been working fine. I can...
Replies
2
Views
1,284
nievesdelimon
N
Back
Top Bottom