conversion S5 for RSLogix5000

migangel

Member
M
Join Date
Apr 2011
Location
Sines
Posts
3
hi friends

I'm doing a conversion program to S5 platform for RSLogix 5000 and this SLT above is an example.

:A =KM
:LW =KC
:SEC =CONT
:
:A =MOTO
:AN =KM
:A F0.0
:SFD =CONT

i need some help please... don't tell me how i did a conversion, tell only what those instructions means.

thanks and best regards
Miguel
 
Last edited:

Similar Topics

M
RSLogix5000 ver20 conversion fault
I am unable to convert a project to V20 using the following procedure. Open a project in version 19. Right click on processor 1769-L35E ECP...
Replies
8
Views
4,886
Guoxin
G
A
SEW IPOS Drive Assembler Code conversion to PLC Ladder Logic
I have a machine which is undergoing upgradation. As part of the process two SEW drives are being replaced., existing Gen B with new Gen C. The...
Replies
3
Views
197
JeffB
J
R
HMI conversion from ESA VT155W00000 to EXOR hmi
Currently I’m using ESA model VT155W0000 HMI and it’s communicate with Fanuc PLC. Can any one suggest can I convert ESA model to EXOR HMI eSMART07M
Replies
0
Views
88
Rajesh.
R
J
BCD Conversion error in s7 300 cpu 313C
hi... i have an issue in s7 300 plc, while we run the machine(in idle there is no fault) , plc cpu goes in SF mode, after restart the power cycle...
Replies
2
Views
117
L D[AR2P#0.0]
L
D
Modscan return value conversion
I have a Type C to RS485 adapter connect to my Siemens RWF55. I use modscan to scan it to get a value from the Siemens controller. In the...
Replies
4
Views
102
drbitboy
drbitboy
Back
Top Bottom