writing in Periperal input address in siemens plc
- Thread starter IJK
- Start date
KalleOlsen
Member
KalleOlsen
Member
No.
The PI area is not in the PLC but on the periheral units on the address bus. If you want to do such trics, keep in the input image area. That is T PIx doesn't work, but T Ix works. Bad habit, though.
Kalle
The PI area is not in the PLC but on the periheral units on the address bus. If you want to do such trics, keep in the input image area. That is T PIx doesn't work, but T Ix works. Bad habit, though.
Kalle
Similar Topics
Hi, I'm having an issue in crimson 3.0 when I create a programme using a case statement referencing a fault word that each bit needs to change the...
Hello all,
I'm currently working on a servo motor linear positioning system (ball screw). I'm all set up regarding communication between my HMI...
Hello All:
I have a Windows 10 PC running a FTView ME Station 10.00. I have a .mer file version 6.00. It has been running well on it for a long...
My R55 Ingersollrand is tripping on motor overload and im falling to see the trip history it is writing Acquarring texts
Hi.
Not the fist time I'm saying this but just to give a background.
95% of my PLC programming has used Schneider over the last 10 years on...
