1 second pulse
- Thread starter ged
- Start date
Yes, there is a system clock memory byte.
You need to enable it in hardware config of CPU in the tab Cycle/Clock Memory - on the bottom of the tab.
And on specified byte, You'll find clock bits.
For example bit 0 is 0.1s long, bit 5 is 1 second on/off and bit 7 is 2 secons on/off.
You need to enable it in hardware config of CPU in the tab Cycle/Clock Memory - on the bottom of the tab.
And on specified byte, You'll find clock bits.
For example bit 0 is 0.1s long, bit 5 is 1 second on/off and bit 7 is 2 secons on/off.
Similar Topics
Very new to PLCs, I am trying to add a delay to a simple motor setup. I want the motor(just name I gave to output) to be able to go on for 5...
Dear All,
We have to read the time gap of two rising pulse which is in micro second how can we do it in plc.(any plc)
thanks in advance.
please help
what is the equivalent of m8013 of Gx developer in KV builder? i need to have a
one second pulse.
also can't find the comparator...
hello guys
is there any 1 millisecond pulse generator in the rslogix5000
inbiult
Hi all,
Anyone knows how to declare a one second pulse in the Rslogix 5000? Is there any command for this function? It does not same like GE or...