problem with the program omron

hy guys ,
3 days ago i copy the program and then download it to plc,
after this i conected each wire in the point correct,
but when i turn on the machine for test i have some problems.
1.in the first steap the head feeding is not activate (ouptut.10h02) why?
normally this machine work in the mode auto.i check the diagrams for see where is the problems? i have more problems but this is is the first. thankou for you hellp
if someone helps me find the problem ,

http://www.plctalk.net/qanda/attachment.php?attachmentid=17737&d=1307650274 diagrams

hey Helio,
Can you keep the same post going
People will answer them

AS i stated
HAVE you checked the I/O wiring and confirmed them BEFORE
Attempting to run your program.