wolverine1981
Member
Hello
In attempt to further my education I am attempting to communicate with several slaves reading and writing. I can communicate but there is some lag time between writing and reading back the write. With each read I Set the request then reset when complete or error. When I attempt this with the writes communication stops. I checked out the link below which is an example from Siemens. I was wondering if in network 3 of the attachment if this would resolve my problem.
https://support.automation.siemens....lib.csinfo&lang=en&objid=47756141&caller=view
Have A Nice Day
Tom
In attempt to further my education I am attempting to communicate with several slaves reading and writing. I can communicate but there is some lag time between writing and reading back the write. With each read I Set the request then reset when complete or error. When I attempt this with the writes communication stops. I checked out the link below which is an example from Siemens. I was wondering if in network 3 of the attachment if this would resolve my problem.
https://support.automation.siemens....lib.csinfo&lang=en&objid=47756141&caller=view
Have A Nice Day
Tom