Ricardo Carmo
Member
Hello;
i'm having some troubles with a com test i'm handling.
i have another end for it, but for now i would like to have :
M241 in io_scanning, trough modbus tcp/ip
and s7 1200 in client mode accessing it
i uploaded in the pictures of the DB in siemens(s7 1200) side, witch says it is connect to the server and the server is replying.
and the pictures on the Schneider(m241) side, that does not receive inf. http://plctalk.net/qanda/images/icons/icon8.gif
i already connected two s7 1200 on client server basis -> ok
i already connected the m241 on io scaning to other Schneider devices -> OK
so, the manual on M241 says it only need ethernet port for this function
https://www.se.com/us/en/faqs/FA304472/
and it should be a easy integration as long i respect the offsets of wr/rd.
https://support.industry.siemens.co...neider-tsx57-server/156583?page=0&pageSize=10
it's 1500 and a tsx but !
i do not see where i got it wrong
hope some one help's me,
i'm having some troubles with a com test i'm handling.
i have another end for it, but for now i would like to have :
M241 in io_scanning, trough modbus tcp/ip
and s7 1200 in client mode accessing it
i uploaded in the pictures of the DB in siemens(s7 1200) side, witch says it is connect to the server and the server is replying.
and the pictures on the Schneider(m241) side, that does not receive inf. http://plctalk.net/qanda/images/icons/icon8.gif
i already connected two s7 1200 on client server basis -> ok
i already connected the m241 on io scaning to other Schneider devices -> OK
so, the manual on M241 says it only need ethernet port for this function
https://www.se.com/us/en/faqs/FA304472/
and it should be a easy integration as long i respect the offsets of wr/rd.
https://support.industry.siemens.co...neider-tsx57-server/156583?page=0&pageSize=10
it's 1500 and a tsx but !
i do not see where i got it wrong
hope some one help's me,