Tag Address

fede_perry

Member
F
Join Date
Jul 2011
Location
Rosario
Posts
1
Hello, a need to create a tag from a AB PLC5/20, it's connected to a panel view 1200e. The tag in the panel view is B01 07/12-08/00, this would be B11:7/12 to B11:8/0. Is there any way of addressing these bits?

Thank you and sorry for my english...i'm from Argentina.
 

Similar Topics

Mas01
S7 TIA Portal: How can I find out the memory address of a tag?...
Hi, Have a look at this picture... How can I find out the memory address of this tag? It was created by adding it to DB "Data_block_1", but I...
Replies
6
Views
1,058
parky
P
D
Red Lion HMI, tag's modbus register address - can change during runtime?
I have a Red Lion G09 scanning 8 Invertek P2 VFDs via modbus RTU - I've setup necessary comms and tags and all works well. I have a 'Settings'...
Replies
3
Views
1,873
BryanG
B
S
RedLion Dynamic Tag Address?
I have never used a RedLion HMI before, but I am fixing to. I have three identical yet separate processes where each will have its own RedLion...
Replies
2
Views
1,705
seth350
S
S
Easybuilder Pro 8000 and Address Tag Library
So as mentioned in my earlier thread, I'm trying to map out modbus values from a P2000 PLC from AD. I have all of my related tags set up in arrays...
Replies
1
Views
1,624
sparkie
S
T
Beijer - Change Tag Address in Runtime
Hello, I want to change Tag address in my ix developer project 2.20 in run time on button click event. As I can see I have to modify ItemID...
Replies
0
Views
1,226
TechAspirant
T
Back
Top Bottom