spidermonkey
Member
We have a 1760-L12AWA ser b pico controler we need to adjust the clock on. Does anyone know if it can be done on the key pad and how to do it?
how to adjust the clock on a pico
- Thread starter spidermonkey
- Start date
MarkNightingale
Lifetime Supporting Member + Moderator
Keep pressing escape on the keypad until the main menu appears.
Then use the arrow keys to scroll down to Set Clock
Mark
See page 102 of manual.
Then use the arrow keys to scroll down to Set Clock
Mark
See page 102 of manual.
Last edited:
spidermonkey
Member
OP
THank you
Similar Topics
Hi all
I thought I had this working but upon doing a checkup a few months after the machine was commissioned, I found that adjusting the RTC via...
Hello Gents,
I have got a request to stop the system at fixed times through the day (at End of Day/Night shifts) which could be done using the...
Hello all! This is probably a silly question but, hey, I can't figure it out. Is there a way to adjust the order that the pens are displayed...
Hello guys,
I use Tia Portal V16.
What is the best way to change the indexed HMI tags when I change the format of an Udt in my plc program...
Good Evening ,
After running for 2 years , I have a few Powerflex 525 drives faulting out
with a F 73 Ethernet Fault . What have you guys...