Communication cable(Programming and Runtime) For Panelview 300

Hi All,
Currently There is Panelview 300 Communicating with 1794 Flex Processor L34 on RS 232 Port (DH 485). The Flex Processor will be replaced with Compact Log-ix L43.My question is will i require Additional Communication Cable ( 1747-C10  )and 1747-PIC for Programming the Panelview 300? or can i use Existing Cable between the flex processor and Panelview for programming.Thanks in Advance.

Regards
Y

Please post the complete catalog number of your Panelview.

Panel view is 2711-K3A5 PV300 , FRN 4.10-4.xx

You can use the same cable. ( Straight thru RS232 cable)

Thank You