motors
- Thread starter roml
- Start date
Eric Nelson
Lifetime Supporting Member + Moderator
Similar Topics
Dear colleagues,
hope you can help on that matter. We have a project where we need to control 3 servomotors to move a auger feeder system...
Hi currently my existing PLC using AB motor & driver to spin production, however customer want to another set, if this possible we use different...
In a control System, I need to move 3 motors attached to roller in stages with speed of 1 to 2 RPM and the torque of motor should be 8-10 Nm...
I'm working on a design phase for a costumer and they've requested PM motors for all conveyor belts throughout the system. We have a gapping...
Hi guys, I have a problem with setting up the parameters for PowerFlex 525.
So we have 4x motor connected in parallel to 1 PowerFlex, each motor...