Allen Bradley PF 400 Drive Question

cire3621

Member
C
Join Date
Jun 2010
Location
New Mexico
Posts
75
We have 2 Allen Bradley PowerFlex 400 drives that we are communicating via RS485 Modbus protocol just fine because right now i have set the screen to communicate with coms with our PLC. But we also need to start and stop the drives with a physical hard wired connection. Is there a way to override coms in the event we need to start and stop the drives manually from the panel rack? Any help would be greatly appreciated.
 

Similar Topics

U
How to communicate between Siemens S7-1200 and Allen-Bradley MicroLogix 1400?
Hi everyone, I'm working on a project where I need to exchange data between a Siemens S7-1200 PLC and an Allen-Bradley MicroLogix 1400 PLC. The...
Replies
8
Views
643
ulotrichous
U
J
Migration from Allen Bradley ML1500 to ML1400 S:/0 Error
I have a Allen Bradely 1500 that has a cracked board. It still works but needs replaced (battery is no longer connected). To make migration easier...
Replies
10
Views
3,223
OkiePC
OkiePC
T
Allen-Bradley MicroLogix 1400 Motion Control / Servo Drive Control
Hello everyone, So on Monday morning I'm expecting to have a box of random parts dumped in front of me. I'll create another thread with more...
Replies
1
Views
1,973
thesandbox
T
I
Allen Bradley 1400 and vietnam power
Have some equipment that have the micrologix 1400 1766-L32BWA. all of our equipment in the locations have 208-220vac 60 hz power. Was just told we...
Replies
4
Views
1,748
parky
P
P
Allen Bradley Micro 1400 A, Expansion I/O
Hi guys, I need to add 2 x 1769-IF4 and 1 x 1769 OW16 output card into an existing Micro 1400 Series A PLC. It has already has 3 expansion...
Replies
7
Views
2,832
Firejo
Firejo
Back
Top Bottom