DamianInRochester
Lifetime Supporting Member
Using Crimson build 484.000 with driver "Allen-Bradley Native Tags via L5K file". In Link options I have "send to emulator" checked, and the emulator is pointing to my Ethernet card. Connection is fine because RSLogix5000 is talking fine with the L35E on the same PC, and the FTalk runtime also works fine. I am running on a 64bit machine but inside an XP virtual machine. The RSLogix5000 and the FTalk is also in the VM.
The emulator does execute and boot up, but it does not appear to be accessing the PLC tags.
Under Network, I have the port mode set to manual config.
I have an additional free IP allocated to the port settings of Ethernet 1.
Not sure what else to try. Anyone else have any luck with the Emulation in a VM?
The emulator does execute and boot up, but it does not appear to be accessing the PLC tags.
Under Network, I have the port mode set to manual config.
I have an additional free IP allocated to the port settings of Ethernet 1.
Not sure what else to try. Anyone else have any luck with the Emulation in a VM?
