acspiderman
Member
I had a problem on a plc I am not versed on.
a 545 could not get it into run and could not connect... we replaced the card dumped the program in and were back in business.
my problem is the battery light never came on.
and a display connected to this machine says low battery.
We tried a new battery and checked it for the 3v before installing... while machine was running.
still no batt light and the display shows low batt yet.
does the light come on when I need to change or when it's good?
this answer will enlighten me to if I need to toggle a bit or get another card.
Thanks in advance.
a 545 could not get it into run and could not connect... we replaced the card dumped the program in and were back in business.
my problem is the battery light never came on.
and a display connected to this machine says low battery.
We tried a new battery and checked it for the 3v before installing... while machine was running.
still no batt light and the display shows low batt yet.
does the light come on when I need to change or when it's good?
this answer will enlighten me to if I need to toggle a bit or get another card.
Thanks in advance.