Oliver Umanzor
Member
Currently, I am working in a migration of a PV550 RIO to PVP600 RIO (adapter RIO module 2711-RN1). In the RIO network those are a SLC 500 5/04 (1747-SN RIO scanner), a 1791-0A32 Remote IO block module and the PC550 RIO.
When the new PVP 600 is connected to the network, the block transfer values can not to be read and shows cero value on all displays. The discrete transfer is working because the bit command is working.
For testing, I prepared a SLC demo with a SLC 5/03 with 1747-SN RIO scanner. In this case the communication of the block transfer is working and the values can be read and the displays show the values.
I need your help to solve the problem occurred when the PVP600 is connected to the network whit a SLC 500 5/04 (1747-SN RIO scanner) and 1791-0A32 Remote IO block module.
I will be gratefully for your help.
When the new PVP 600 is connected to the network, the block transfer values can not to be read and shows cero value on all displays. The discrete transfer is working because the bit command is working.
For testing, I prepared a SLC demo with a SLC 5/03 with 1747-SN RIO scanner. In this case the communication of the block transfer is working and the values can be read and the displays show the values.
I need your help to solve the problem occurred when the PVP600 is connected to the network whit a SLC 500 5/04 (1747-SN RIO scanner) and 1791-0A32 Remote IO block module.
I will be gratefully for your help.