Replacing a 1794-ACN15 for a 1794-ACNR15

RodV

Member
R
Join Date
May 2012
Location
Chillan
Posts
8
I need to replace a broken 1794-ACN15 FlexI/O Controlnet adapter and I can only get a 1794-ACNR15 which is a redundant one. Can I do this replacement and only use one connector of the two available in the module?

Thanks

Rod
 
Yes.

A 1794-ACNR15 with only Channel A connected is functionally identical to a single-channel 1794-ACN15.
 

Similar Topics

A
Replacing 1794-IE4XOE2 with IF2XOF2I
I have got one of my 1794-IE4XOE2 card faulty and i dont have any spare one to replace at the moment. I'm looking to remove 1794-IE4XOE2 and add...
Replies
10
Views
4,056
Gil47
Gil47
L
replacing plc 2-20 with plc 2-30
I have a plc @-20 in my factory where i cannot anymore upload the ladder program . . I Have in front of me a plc 2-30 .. Can i replace it ...
Replies
1
Views
103
joseph_e2
J
P
Replacing a PowerFlex 70 with a 525 using Profibus, help please!
After replacing the 70 with the 525, the PLC can read from the drive and recognizes it as online, but no commands are being listened to. PLC is...
Replies
1
Views
559
Profibussin
P
K
Replacing Powerflex 575 devicenet VFD with different VFD
Hello all, It's been a while but have an odd request. Have a customer that has a AB SLC5/05 with a SDN module. On the network are several...
Replies
3
Views
1,171
khekd
K
Lamboom
Replacing the touch screen on a G3 Red Lion HMI
Has anyone ever replaced a touch screen on a legacy Red Lion G3 series HMI?
Replies
12
Views
1,454
Lamboom
Lamboom
Back
Top Bottom