Help with AB RSlogix 5000

Hi,
I am needing help with the use of Allen-Bradley.
I am only familiar with Siemens Step7 ver 5.4 and Siemens WinnCC Flexible 2008 programs, however, I have a one off project that will require the use of a Allen-Bradley 1769-L1 controller, and so I now need to learn RSlogix 5000 and the FactoryTalk View Studio ME programs.

Is there a help guide of some sorts that i can use to better understand the language that AB uses compared to Siemens?

Or is there a way i can import my Siemens code to the AB code?

Hi,

Nice Avatar,

If you have selected 'Start page' options when you installed RSLogix 5000 software, that should be a good place to start with. It include a lot of manuals, instruction set reference apart from a series of videos.

I doubt there is any way you can import siemens to AB.

And of course Plc.net is here when you are stuck :site:

Regards

There is a Conversion Guide available here;

http://literature.rockwellautomation.com/idc/groups/literature/documents/ap/logix-ap010_-en-p.pdf

Stu....