S7-200 unknown password

gust

Member
G
Join Date
Mar 2004
Location
Essen, North of Belgium
Posts
1
Hi PLC fanatics,

I'm just a PLC beginner and I need a specialists help for following: Acquired a tennis scoreboard with S7-216. I wish to upload the software from PLC to PC for modification and safe keeping. PLC is protected with password. Manufacturer is unknown and source code not available.
Is there way to go around the password? If yes, how do I proceed?

Any help is very much appreciated.
Thanks
gust
 

Similar Topics

E
Connect To Unknown S7-1200 Version
We primarily use AB controllers at our small scale facility, but we now have a new S7-1200 controller on site that were part of a skid mounted...
Replies
8
Views
3,437
widelto
widelto
J
Unknown output pin on micrologix 1200
Hi to all! Can i ask help on this one. i cant seem to analyze what this pin is for many thanks to those who will reply!!!
Replies
7
Views
2,665
Saffa
S
R
S7-200 recovery program from eeprom
Hi. I have a 222 CPU. I need to recover the program from the eeprom memory. Is it possible?
Replies
1
Views
82
BryanG
B
K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
252
KalvMavin
K
J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
81
jimix
J
Back
Top Bottom