Newly acquired 'old' hardware

steelblue48310

Member
S
Join Date
Jan 2013
Location
Michigan
Posts
41
Hey guys... still learning what all the different AB models do. I have a machine here that has some 1794-based FlexIO modules (with the AENT) and a PanelView Plus 700 attached to it, but no 'main' control panel at all. There was a CAT5 cable going to each, but cut off with a sawsall apparently. :p

So, the question is: What sort of PLC and Ethernet stuff would have *likely* been at the other end of the cables? Control Logix? Or... ? :confused: Thanx!
 
... with 1756-ENBT/1756-EN2T
or FlexLogix with 1788-ENBT
or 1768 CompactLogix with 1768-ENBT
or 1769-L32E CompactLogix
or 1969-L35E CompactLogix
or any CompactLogix 5730
 

Similar Topics

C
Explorer rendering glitch in old FactoryTalk View ME
This is admittedly a pretty obscure problem, but maybe someone else has run into it, or at least something similar. For reasons I won't get into...
Replies
3
Views
132
Operaghost
Operaghost
L
Resetting old RSLINX Master Disk floppy
Does Rockwell still offer reset codes for old school Master Disk floppy's? In a bind and need to reset the activation disk soon and to be pointed...
Replies
9
Views
230
LMDAVE
L
C
Update old Parker TS80xx HMIs to use Crimson programs?
Has anyone found a way to convert/replace/update the firmware on old Parker TS80xx series HMIs (i.e. TS8010, TS8006, etc) to accept Crimson...
Replies
0
Views
91
CageFreeBMW
C
T
Powerflex 525 has a frequency of 2-2.50Hz when being told to stop
Hey all, I am currently working on a depalletizer for a customer and we are doing a hoist upgrade. This is a SLC500 processor and the drives are...
Replies
6
Views
297
Tbone1465
T
A
Unable to find IC AD7501KN of an old controller.
Hi, One of my customers has an old fabric tensile testing machine. The IC # AD7501KN of its controller has malfunctioned. This IC is related to...
Replies
1
Views
80
comicon
C
Back
Top Bottom