Redundancy module DISQUALIFIED! Why?

oreo1

Member
O
Join Date
Feb 2013
Location
Mass
Posts
3
Hello everyone, I am managing Allen Bradlley redundancy module and it gets disqualified periodically for not apparent reason. When it gets diq I don't have access thru rslogix5000. Please shed some light.
Thanks,:(
 

Similar Topics

A
1756-RM2/A Redundancy Module Disqualified (at times)
Hello, My 1756-RM2/A Redundancy Module keeps entering the Disqualified module for half an hour or so, and then switches to Synchronized for like...
Replies
4
Views
6,461
p_logix
P
T
ControlLogix Redundancy Module Single Mode Fiber
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
84
Ken Moore
Ken Moore
M
Redundancy new module in chassis
Good day Gents, I'm thinking about adding the new EN2TR modules into the Redundant chassis. My system is 1756-L74, ver.20.55. Is possible to be...
Replies
2
Views
748
mazacha78
M
Q
1756/RM2/A Redundancy Module Synchronization Issue
Hi All, I am trying to synch the primary with secondary, which apparently was disqualified due to Watchdog error. I am getting the following...
Replies
0
Views
921
QasimFSH
Q
R
Logix Designer Redundancy Module issue
Hi Folks, I have 1756-L81E (CPU) (Firmware: 33.012) 1756-EN2TR (Ethernet Module) (Firmware: 11.002) 1756-RM2 (Redundancy Module) (Firmware...
Replies
2
Views
1,475
Radhik
R
Back
Top Bottom