I am using the HD67077-B2 M-Bus to ethernet/IP converter and I am trying to connect it to a PLC to be able to read data from Siemens Heating and Cooling meters.
I programmed the Converter using ADFweb.com Compositor SW67077.
I also set up RSLogix as advised in the manual but sometimes I am getting negative decimal values returned, which are impossible.
The data type is SINT in RSLogix.
Did anyone have this same problem?
Thank you
Patrick
I programmed the Converter using ADFweb.com Compositor SW67077.
I also set up RSLogix as advised in the manual but sometimes I am getting negative decimal values returned, which are impossible.
The data type is SINT in RSLogix.
Did anyone have this same problem?
Thank you
Patrick