RSLogix 5000 and HD67077-B2 M-Bus to Ethernet converter

keristos

Member
K
Join Date
Aug 2011
Location
Malta
Posts
65
I am using the HD67077-B2 M-Bus to ethernet/IP converter and I am trying to connect it to a PLC to be able to read data from Siemens Heating and Cooling meters.

I programmed the Converter using ADFweb.com Compositor SW67077.

I also set up RSLogix as advised in the manual but sometimes I am getting negative decimal values returned, which are impossible.

The data type is SINT in RSLogix.

Did anyone have this same problem?

Thank you
Patrick
 

Similar Topics

E
Cognex dataman 280 barcode reader input to rslogix 5000
Hello, I am trying to read a barcode scanner input using a cognex dataman 280 barcode reader, store it another string, the compare with another...
Replies
1
Views
91
Emmabod
E
P
AB PLC, Rslogix 5000, alarm issue
Hi folks, in the alarm manager of Rslogix 5000, the tag-based alarm has been created. But when I tried to change the condition, it was found the...
Replies
2
Views
194
PLCbug123
P
A
Tank level rslogix 5000 program. I’ve got errors on rung 2,3,4. Do u see the problems? Also does my geq n les look right?
Replies
4
Views
235
drbitboy
drbitboy
A
Can u help me on a RSLogix 5000 program?
I am completely stuck on building a ladder program that requires a start button to be pressed 3 times to turn on motor 1. Then motor 2 starts...
2
Replies
20
Views
640
drbitboy
drbitboy
K
Can't see "verify rung" data in RSLogix 5000
First off, I'm a hobbyist-level programmer, and this program isn't controlling anything anything that could even remotely be considered "life...
2
Replies
18
Views
575
joseph_e2
J
Back
Top Bottom