Hi,
I'm working in a project that have twido TWDLMDA40DTK with serial expansion TWDNOZ485T. I configured in TwidoSuite a serial net (in port2) with modbus RTU, baudrate 9600, parity even and 1 stop bit. The plc twido is slave.
I tested the conection with port 2 using simulator modbus like master, but I don't receive data the plc...
Anybody help this problem?
I'm working in a project that have twido TWDLMDA40DTK with serial expansion TWDNOZ485T. I configured in TwidoSuite a serial net (in port2) with modbus RTU, baudrate 9600, parity even and 1 stop bit. The plc twido is slave.
I tested the conection with port 2 using simulator modbus like master, but I don't receive data the plc...
Anybody help this problem?