Test failed in SLC Ethernet

Mxsterxguerix

Member
M
Join Date
Jan 2013
Location
Mexico
Posts
2
Hello.
I have a question about of PLC SLC 500/05, when Im editing online and I try to assembly the plc send me an error ( Test failed) kick me offline.

Some one knows Why ?

Thx.
 

Similar Topics

B
RS Logix 500 and SLC 500- Doing online edits , keep getting Test Edit Failed
Good Afternoon, I'm trying to do online edits on a SLC 500 5/05 . After I put my instruction in , I keep getting " Test Edits Failed " ...
Replies
6
Views
3,739
DRSapach
D
Sinc_green
Indralogix Failed Connection Test
I've a project using Bosch Rexroth MLCs and Indraworks 11.10 I've had trouble in the past getting a successful connection test while trying to...
Replies
0
Views
1,736
Sinc_green
Sinc_green
R
battery test failed pv1400e
I have an old PV1400E touch screen that had never been programmed and has been in storage. It is left over from a previous project. I was going to...
Replies
3
Views
2,592
sifis
S
P
M221 serial line stuck (stress test)
Hi, I am using M221 reading from 3 different sensors (modbus rs485) sharing same bus (daisy chain). I am currently using READ_VAR (in total...
Replies
0
Views
84
Paulo Balbino
P
C
Power flex drive 525 control error during direction test
I am trying motor startup with pf525 drive by using wizard start over ethernet communication but during direction test it's showing control error...
Replies
3
Views
186
robertmee
R
Back
Top Bottom