basharath Member B Join Date Mar 2010 Location hyderabad Posts 103 Dec 23, 2013 #1 Dear all, can anybody point me up how to link a digital point to the analog one, such that if i toggle a digital point from 0 to 1 the analog point should start,similarly for 1 to 0. Thanks.
Dear all, can anybody point me up how to link a digital point to the analog one, such that if i toggle a digital point from 0 to 1 the analog point should start,similarly for 1 to 0. Thanks.
RussB Lifetime Supporting Member Join Date Oct 2003 Location Michigan Posts 2,914 Dec 23, 2013 #2 That will depend on which Cimplicity product you are using. You may find what you are looking for by searching here: http://forums.ge-ip.com/forumdisplay.php?f=68 or here: http://support.ge-ip.com/support/index?page=prodhome&cat=HMISCADACIMPLICITY
That will depend on which Cimplicity product you are using. You may find what you are looking for by searching here: http://forums.ge-ip.com/forumdisplay.php?f=68 or here: http://support.ge-ip.com/support/index?page=prodhome&cat=HMISCADACIMPLICITY
basharath Member OP B Join Date Mar 2010 Location hyderabad Posts 103 Dec 23, 2013 #3 I am using cimplicity 8.0