How to mirroring HMI Intouch Program

Hi guys, i have some task and i think it's a bit difficult (can be done but need some time, if i'm not doing it properly)

so the task is, to change ways how the program flows, for now it's from right to left, and i need to change it from left to right. my question are

1. is it possible to mirroring my program with some tools? rather than mirroring manually. (move one by one my object)
2. if it cant, how to do that in most simple ways?

i just try to flip it, but offcourse it's not work (too desperate to do it )

if only it's not to many object, i dont mind to do that manually, but there are so many object (at same level with factories) so i think i should find the fastest way

either ways, thank you for your help, and care to read my problem

Hello,

In PeakHMI if you select one object, like a polygon and select flip, it flips the points of the polygon.

If you select 2 or more objects and select flip, it flips the points (if a polygon) and the position of the objects. A----B becomes B----A.

The same applies if you select the graphic elements and group them before the flip selection.

You could try both in InTouch.

Mark- said:

Hello,

In PeakHMI if you select one object, like a polygon and select flip, it flips the points of the polygon.

If you select 2 or more objects and select flip, it flips the points (if a polygon) and the position of the objects. A----B becomes B----A.

The same applies if you select the graphic elements and group them before the flip selection.

You could try both in InTouch.

Click to expand...

thx problem solved