Parker 690 plus "comm error code n"

tech_man

Member
T
Join Date
Aug 2013
Location
up
Posts
4
Equipment:
VFD:pARKER 690 PLUS SERIES
Comm: DEVICENET(ADAPTOR CONNECTED BUT NOT IN LINE)

PROBLEM: WHENEVER I UPLOAD PROGRAM FROM DRIVE TO HMI, FOLLOWING ERROR SHOWING ON HMI '' COMM ERROR CODE N".

CAN ANYBODY HELP ME ?
 

Similar Topics

S
pinout for Parker 690+ programming cable?
I need to emergency fabricate a cable to program a Parker 690+ VFD. Part # CM351909 I believe. RJ6 on one end, DB9 on the other. I cannot find the...
Replies
1
Views
2,293
strantor
S
P
Parker ssd drive 690 series
Dear All, I am using parker 690series drive. I am using modbus rtu protocol. Configuration used: Laptop-RS232 to RS485 converter- Drive. Settings...
Replies
0
Views
2,347
patil.inst
P
C
Update old Parker TS80xx HMIs to use Crimson programs?
Has anyone found a way to convert/replace/update the firmware on old Parker TS80xx series HMIs (i.e. TS8010, TS8006, etc) to accept Crimson...
Replies
0
Views
91
CageFreeBMW
C
T
Parker eurotherm SSD 637 servo drive software
Dear all, we have a couple of SSD 637 servo drives that need to communicate trough easyrider. On the parker website you can download easyrider...
Replies
0
Views
511
tvgids
T
S
Communication of Parker SSD 590+
Hy everyone, I have Parker DC Drive (590+). in ints manual there is mentioned about P3 port which is based on (RS-232) communication. I want to...
Replies
0
Views
906
SaadJanjua
S
Back
Top Bottom