Omron cp1e

rockysri

Member
R
Join Date
Sep 2014
Location
*******
Posts
1
Guys am new in this site so i think all are assist to me, How to communicate omron cp1e with intouch scada ?? Is there any free or trial version of i/o driver software please suggest me that website?:(
 
Ask them if they have a driver - you may have to pay for it. I would think the driver you would need would be a FINS driver. Alternatively use OPC - I hate it but many love it! I would always prefer to use a FINS driver - far more efficient.
 

Similar Topics

B
Problem with delayed switch on of omron sysmac cp1e
Hello. I have a problem with omron sysmac cp1e controller delayed start. The controller has been working on the punch press since 2016. Recently...
Replies
1
Views
769
tdoa
T
K
Omron CP1E Ethernet (TCP/IP) communication
Hi, I need to communicate omron CP1E PLC with SCADA to get the status of the machine. There is no etherent port available but an empty expansion...
Replies
2
Views
1,614
karthiknd7
K
J
how to factory reset omron CP1E
Hello... I remove one CP1E from old useless machine and I would like to use it with something else....but it is locked/have no pass/....How can I...
Replies
0
Views
1,453
Jirrr
J
R
omron cp1e real time clock
hi all i have used a real time clock to turn on a bit after 1 month. the plc was off for this whole month and when i turned on the plc after a...
Replies
2
Views
1,429
RAJNAIK
R
C
Omron CP1E Communication Issue
We had a CP1E go bad (power issue). Installed spare and could not get it to communicate to our motion drive via add on RS485 card. Tried...
Replies
5
Views
1,512
gtsuport
G
Back
Top Bottom