Dear All,
I have an Allen Bradley 1336 Plus for an induction motor rated three phase, 30kw, 480volts.
When I started the drive, the speed just about 1.5 Hz, one minute later, fault 64 came up. I measured the motor current just 12amps.
This is the drive that I got from somewhere and never be used in our company, maybe there are some parameters have to be changed. Any help will be appreciated.
Benyamin
I have an Allen Bradley 1336 Plus for an induction motor rated three phase, 30kw, 480volts.
When I started the drive, the speed just about 1.5 Hz, one minute later, fault 64 came up. I measured the motor current just 12amps.
This is the drive that I got from somewhere and never be used in our company, maybe there are some parameters have to be changed. Any help will be appreciated.
Benyamin