PLCTech42 Member P Join Date Jan 2015 Location Raleigh, NC Posts 10 Jan 26, 2015 #1 Can someone convert the attached RSP file to PC5? I really appreciate it. Thanks, Jeff
Mickey Lifetime Supporting Member Join Date May 2003 Location Palmdale,Ca Posts 10,659 Jan 26, 2015 #2 Here...
Mickey Lifetime Supporting Member Join Date May 2003 Location Palmdale,Ca Posts 10,659 Jan 26, 2015 #4 You're welcome
PLCTech42 Member OP P Join Date Jan 2015 Location Raleigh, NC Posts 10 Jan 26, 2015 #5 Mickey, Can you generate a pdf report of the program for me. It turns out we are going to re-use the PLC5, so I need the program and I/O config in its original format. Thanks, Jeff
Mickey, Can you generate a pdf report of the program for me. It turns out we are going to re-use the PLC5, so I need the program and I/O config in its original format. Thanks, Jeff
PLCTech42 Member OP P Join Date Jan 2015 Location Raleigh, NC Posts 10 Jan 26, 2015 #6 Nevermind. I was able to get what I needed from the converted version.
Mickey Lifetime Supporting Member Join Date May 2003 Location Palmdale,Ca Posts 10,659 Jan 26, 2015 #7 To large to post 1.62MB. If you can PM me with an e-mail address I will send it to you. Edit: I see you have solved your problem.
To large to post 1.62MB. If you can PM me with an e-mail address I will send it to you. Edit: I see you have solved your problem.