Rx3i Memory Exchange

sultanahmed

Member
S
Join Date
Jul 2013
Location
home
Posts
63
Hi All,

I am using Pac sytem in which i am using IC695RMX128. I want to know which fiber optic cable should i use for it??
Single Mode or Multimode fiber optic?? any part number.
šŸ™ƒ
 

Similar Topics

O
GE-IP Rx3i 8022 Warning when copying Byte Array to Word memory
I have a CMM2 (Serial I/O) card in my system that talks to a device that utilizes Byte oriented messages EG a typical message I would send would...
Replies
6
Views
2,246
Steve Bailey
Steve Bailey
H
GE RX3i write/read non-volatile memory
I am using the lader logic SVC_56 & SVC_57 to write and read data to the PLC's flash memory. I've followed the instructions to configure the...
Replies
4
Views
2,259
herrergu
H
I
Addressing in Rx3i PLC
I have a system using Rx3I CRU320 redundant CPU with Proficy Machine Edition Software. In the hardware configuration of each CPU module, under...
Replies
14
Views
388
IAR86
I
M
PACS Rx3i CRU320 - variables missing between redundant controllers
Hi, we are using Rx3i CRU320 redundant PLC system and we noticed a discrepancy between Primary and Secondary controller. Couple of variables (DI)...
Replies
8
Views
282
mastops
M
S
Simulate/Force Analog Inputs with Emerson RX3i PACSystems?
Hi there, I'm doing some extensive testing and commissioning with a slew of new Emerson PACSystems RX3i PLCs. It would be convenient to...
Replies
5
Views
102
Steve Bailey
Steve Bailey
Back
Top Bottom