Omron PLC and EZ Automation Marquee

HI,
I was wondering if anyone has tried sending messages to an EZ Automation Marquee from an Omron CP1H PLC via Ethernet? The manufacturer doesn't have any examples using Omron. The marquee can display text sent in the form of an Ascii string. http://www.ezautomation.net/ezmarquee/ezmarquee_menu.htm
Thanks

I've done this before with a CJ2M-CPU33 but I added a CP1W-CIF12 to talk to 6 screens worked good.
Used RS-485 and daisy chained them together.

I could do that, but I would like to connect them by Ethernet since I also want to send messages from CX Supervisor and it would be easier if they could be connected using Ethernet.

Shawn Cassidy said:

I could do that, but I would like to connect them by Ethernet since I also want to send messages from CX Supervisor and it would be easier if they could be connected using Ethernet.

Click to expand...

You can use them by configuring it in Network Configurator for EtherNetIP