Panelview to panelview plus

Hojland

Member
Join Date
Oct 2006
Location
Langå
Posts
203
I have to upload a program for a panelview600 and convert it to a panelview plus 600. Do I need panebuilder32 to do so, or can it be done from factorytalkview
 
If you don't have a copy of the Panelview program on your PC, you will probably need Panelbuilder32 to download the program from the Panelview to your PC. Once you have a copy of the program, everything else you need to do is done in FactoryView Studio for importing and converting the program to the Panelview+.
 

Similar Topics

I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
82
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
56
Hello All! Ok, we got a Work cell from a Integrator that is sending saved scanning data from the PLC to HMI (Panel View Plus) when I look at this...
Replies
3
Views
83
Hello everyone. This is more of an HMI issue. I have a new PanelView Plus 7 Series B. I am using the alarm list object to display the fault...
Replies
0
Views
93
Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
133
Back
Top Bottom