Panelview to panelview plus

Hojland

Member
H
Join Date
Oct 2006
Location
Langå
Posts
203
I have to upload a program for a panelview600 and convert it to a panelview plus 600. Do I need panebuilder32 to do so, or can it be done from factorytalkview
 
If you don't have a copy of the Panelview program on your PC, you will probably need Panelbuilder32 to download the program from the Panelview to your PC. Once you have a copy of the program, everything else you need to do is done in FactoryView Studio for importing and converting the program to the Panelview+.
 

Similar Topics

S
Panelview Plus 7 Std Series D - Screen Navigation Issues
I'm at a loss here and hoping someone else has seen this: Background: We've got two identical machines on our floor (we'll call them machine A &...
Replies
0
Views
70
Super Steve
S
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
129
jscampbell210
J
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
104
celso3093
C
F
PanelView Plus and .CRV Files
Hello All! Ok, we got a Work cell from a Integrator that is sending saved scanning data from the PLC to HMI (Panel View Plus) when I look at this...
Replies
3
Views
112
Foxtrot2050
F
Y
PanelView Plus 7
Hello everyone. This is more of an HMI issue. I have a new PanelView Plus 7 Series B. I am using the alarm list object to display the fault...
Replies
0
Views
113
YellowRobot
Y
Back
Top Bottom