I work for a company with many sites and we are installing a new process on one of our machines that mirrors another factories setup. Our engineer visited there and got me a copy of their program. I can copy the subroutine and put it in my program as a subroutine and then I verified all of the rungs. I have some rungs that are trying to access an F file and this program has it as a N file (the program is looking for F18 in the data files and the program has it as N18). Can I just create a new N file and assign new addresses to those bits? What else should I look for besides making sure I/O's are assigned to open terminals etc. I am using Logix 5 for this project as the plc is a plc5/40e
Last edited: