Protos X field I/O

Byron

Lifetime Supporting Member
B
Join Date
Apr 2004
Location
Caruthers, California
Posts
257
Greetings.
I searched the forum for Protos X field I/O, did not find any results so here is a new thread.

Sold by Automation Direct. Anyone know anything about it? It looks like Beckhoff or Wago or Opto-22 ???
 

Similar Topics

T
Protos X multiple PX-TCP1s on an Ethernet Switch Modbus range
I'm using the Protos X PX-TCP1 buss couplers with the Productivity 3000. I have no issues with one buss coupler, But I need to add two more. The...
Replies
1
Views
1,666
TeddyB
T
B
Advice for 2 control signal one field equipment
I am not sure why this is requested, but it was asked. Currently I have one PLC , with one output to a relay, turning on a field equipment (just...
Replies
7
Views
217
Steve Bailey
Steve Bailey
Mas01
Siemens S7/TIA v18: Can I make a specific input field active on a screen?...
Context: PLC= S7-1212C, HMI=KTP1200 Basic. Hi again, When the "REPORT" button is pressed (on a different screen), it takes the operator to the...
Replies
7
Views
663
Mas01
Mas01
mad4x4
LIDAR SENSOR - with Field bus for PLC
Looking for a LIDAR sensor (2d) that we can use with a Siemens PLC for measurement, Would like to interface directly with 4-20mA or a Field bus...
Replies
5
Views
975
Jeev
Jeev
P
DLR Configuration 1756-EN2TR with Field 1783-EATP
Hi Guys, I am doing a project that involves a Ring Configuration with 1756-EN2TR with Field Fiber Device 1783-ETAP2F and 1783-ETAP1F. I am not...
Replies
12
Views
2,108
Contr_Conn
Contr_Conn
Back
Top Bottom