calinorth Member C Join Date Apr 2015 Location Stockton Posts 21 Sep 4, 2015 #1 Where can I get this software I need it for work.
Levi G Member L Join Date Sep 2015 Location Alberta Posts 148 Sep 5, 2015 #2 I would suggest calling Eaton at 877-386-2273 Opt. 2, Opt. 5, Opt. 2 They provided me with software for a D32LT .
I would suggest calling Eaton at 877-386-2273 Opt. 2, Opt. 5, Opt. 2 They provided me with software for a D32LT .
jrwb4gbm Lifetime Supporting Member J Join Date Apr 2002 Location NC Posts 2,245 Sep 5, 2015 #3 See thread in link below. A D300 uses the same software. Follow links in the 1st post. Link: http://www.plctalk.net/qanda/showthread.php?t=69528&highlight=d300
See thread in link below. A D300 uses the same software. Follow links in the 1st post. Link: http://www.plctalk.net/qanda/showthread.php?t=69528&highlight=d300
jrwb4gbm Lifetime Supporting Member J Join Date Apr 2002 Location NC Posts 2,245 Sep 8, 2015 #4 Try these two links, if it doesn't work for you then it's a firewall issue with your computer or location. Let me know if no luck, I will put them on a Google Drive and PM you a link. http://www.foxautomation.com/wingpc/ http://www.foxautomation.com/wingpc/WinGPC.zip
Try these two links, if it doesn't work for you then it's a firewall issue with your computer or location. Let me know if no luck, I will put them on a Google Drive and PM you a link. http://www.foxautomation.com/wingpc/ http://www.foxautomation.com/wingpc/WinGPC.zip