Chibu, drbitboy, jtdoiron, khalid122, lanman, parky, Peter Nachtwey

plcman2, JesperMP, Eric Nelson, MarkNightingale, Steve Bailey, Ken Roach, Steve Etter, boneless, dcooper33, bernie_carlton, gmferg, Christoff84, JeffKiper, sthompson, kolyur, iant, geniusintraining, RheinhardtP, TheWaterboy, 5618 

Hi Folks, Effective immediately there are now 3 forum layout styles for you to use. By...
Started by: Phil Melore (July 26th, 2020)

March 23rd, 2022 11:30 AM
by nastasiya09

CPU: 5069-L330ER v32 HMI: PV+7 10" v11 Every time the customer powers off the machine and...
Started by: janner_10 (April 20th, 2020)

March 21st, 2023 04:38 AM
by Lord Farquaad

Hi, I am playing around with Crimson 3.2 (RedLion). I am checking out the image file...
Started by: frajosi (March 20th, 2023)

March 21st, 2023 04:33 AM
by frajosi

Hi Crimson3.1 uses the GotoPage() to navigate to pages and the argument has to be a Display...
Started by: jacquesp (March 20th, 2023)

March 21st, 2023 03:46 AM
by jacquesp

Hello. I have been working on my first plc project for a while now. I just ordered all the parts...
Started by: Aljubovic (March 17th, 2023)

March 21st, 2023 03:05 AM
by parky

Hey guys, I have been working with PLC's since last month. I have a virtual machine where I can...
Started by: folola1 (March 16th, 2023)

March 20th, 2023 09:22 PM
by AlfredoQuintero

I cannot get CCW to add a controller, i keep getting a error message saying that the device is not...
Started by: PLCUU (March 19th, 2023)

March 20th, 2023 08:07 PM
by Ken Roach

I am deciding on components for a bayed modular enclosure containing multiple VFDs (480V/350A/321Hp...
Started by: designvfds (March 19th, 2023)

March 20th, 2023 06:14 PM
by James Mcquade

Been trying for a while to get a flowmeter with Modbus RS485 comms to talk to my Redlion Graphite...
Started by: M0Dark (March 20th, 2023)

March 20th, 2023 04:06 PM
by BryanG

Hello, I am running into an intermittent issue with transaction manger throwing an error 33119 and...
Started by: BlakeH012 (March 20th, 2023)

March 20th, 2023 01:26 PM
by BlakeH012

Good Afternoon , We have a few Powerflex 70 drives still in service . I'm using one in a...
Started by: Baker in Virginia (March 20th, 2023)

March 20th, 2023 01:19 PM
by alan_505

I am working on a program that was developed in 2015 for an S7-300 safety PLC. The new copy of...
Started by: kamenges (March 18th, 2023)

March 20th, 2023 09:58 AM
by Ken Moore

Just wanted to see if anyone can see anything wrong with this as my mind is being blown. Basically,...
Started by: dwoodlock (March 13th, 2023)

March 20th, 2023 09:36 AM
by dwoodlock

I have a PowerFlex 40 drive that communicates with a 1756-L61 PLC via an 22-COMM-E card. There's an...
Started by: Jcarlow (March 17th, 2023)

March 20th, 2023 07:54 AM
by Jcarlow

I’m looking at automating my house. My question is my dpinkler system. If it has been rating the...
Started by: ford50killa (March 19th, 2023)

March 20th, 2023 06:36 AM
by PLC Pie Guy

Hey Everyone, I need to Interface Ignition SCADA ethernet network to an Allen Bradley SLC5/04...
Started by: ControlSystems (March 19th, 2023)

March 20th, 2023 05:28 AM
by sigmadelta

I have what might be an unusual question. I would like to use motion controls to simplify the...
Started by: jape (March 19th, 2023)

March 20th, 2023 04:16 AM
by jape

Hello guys, I am new in this PLC programming and currently working in a smart chiller system...
Started by: Aimin Ariff (March 19th, 2023)

March 19th, 2023 10:22 PM
by Aimin Ariff

Please excuse the basic question, but I've never worked on Step 7 before (until now, only dealt...
Started by: Mas01 (March 1st, 2023)

March 19th, 2023 04:09 PM
by mikesoier

Looking at getting comms to an FX3U to Ignition. There is already an expansion card left of the PLC...
Started by: the_msp (March 9th, 2023)

March 19th, 2023 02:39 PM
by the_msp

Gents: Quick rundown. Water pump, 75ft of head pressure on a 10” line, open at the discharge...
Started by: Slwagner73 (March 16th, 2023)

March 19th, 2023 09:51 AM
by Tom Jenkins

I need to get all the versions of RSLogix and Studio downloaded and installed on virtual machines....
Started by: AutomationTechBrian (November 16th, 2020)

March 19th, 2023 01:36 AM
by lgooris

Hi All… I work for a company that makes bags. Operators of the machines that make the bags need to...
Started by: Leonightiz (March 15th, 2023)

March 19th, 2023 01:04 AM
by GaryS

Hola que tal, estoy intentando restaurar un archivo .mer el cual se me entrego para la misma tarea,...
Started by: Dalton Vll (March 17th, 2023)

March 18th, 2023 08:07 PM
by Dalton Vll

Hi Guys, Hoping we still have some Siemens Old hardware Gurus on here. We are trying to support...
Started by: exiled (March 17th, 2023)

March 18th, 2023 05:20 PM
by sigmadelta

I have a set of these: https://www.i-s.gr/files/ND%20Clamp-on%20CT%20Brochure.pdf ...
Started by: the_msp (March 18th, 2023)

March 18th, 2023 01:53 PM
by the_msp