AlexDarsigny
Member
Hi,
I've worked for years with Schneider PLCs. There are what's called operator screens that we can built within the programmation software.
These operator screen acts like the watch tool in RsLogix but there are graphics showing statuses and analog values and it's possible to write into the tags without any adressing since it's basically a watch tool with graphical layer above within the programmation software.
Is there something similar for RsLogix or any other Rockwell software that is able to synchronize with my PLC? I'm trying to avoid the development of an entire HMI application since I only want to test my program.
I have too much tags to check simultaneously to use a basic watch list where I have to scroll to see everything tag I need.
Thanks.
I've worked for years with Schneider PLCs. There are what's called operator screens that we can built within the programmation software.
These operator screen acts like the watch tool in RsLogix but there are graphics showing statuses and analog values and it's possible to write into the tags without any adressing since it's basically a watch tool with graphical layer above within the programmation software.
Is there something similar for RsLogix or any other Rockwell software that is able to synchronize with my PLC? I'm trying to avoid the development of an entire HMI application since I only want to test my program.
I have too much tags to check simultaneously to use a basic watch list where I have to scroll to see everything tag I need.
Thanks.