Hi every one,i am new to this forum
Here's some problems i need your helps.
I've recently purchased the 2nd hand Cutler D100A plc and Toshiba Ex2040PRGB LCD programer (not version 2) from ebay.
Please help me solve these problems i have with these equipments:
1:what cable do i need to program the Cutler D100A PLC from the Toshiba LCD programer.(I've used the Cat5 patch from my working internet router lead. When i plug in the PLC with the programer: FAULT,LOW BATTERY led came on.So is this sounds ok?
2.Does the Toshiba LCD programer (not verson 2) compatible with the D100A?
3.The there's nothing in the memory cartridge for this PLC(D100)as it said BLANK memory cartridge on the memory slot,so do i need a memory cartridge to do programing?
4.When PLC powered on with LCD programer pluged in , POWER,RUN,FAULT,LOW BATTERY led came on. Is this normal?
When programer unpluged : POWER,RUN led indicated
ps. I've opened the PLC and checked battery status: 2.96VDC, is this ok?
Any comments or solutions from you will much appreciated
Please see pictures from below for my clear explaination
http://img.villagephotos.com/imageview.aspx?i=25814459
http://img.villagephotos.com/imageview.aspx?i=25814460
Here's some problems i need your helps.
I've recently purchased the 2nd hand Cutler D100A plc and Toshiba Ex2040PRGB LCD programer (not version 2) from ebay.
Please help me solve these problems i have with these equipments:
1:what cable do i need to program the Cutler D100A PLC from the Toshiba LCD programer.(I've used the Cat5 patch from my working internet router lead. When i plug in the PLC with the programer: FAULT,LOW BATTERY led came on.So is this sounds ok?
2.Does the Toshiba LCD programer (not verson 2) compatible with the D100A?
3.The there's nothing in the memory cartridge for this PLC(D100)as it said BLANK memory cartridge on the memory slot,so do i need a memory cartridge to do programing?
4.When PLC powered on with LCD programer pluged in , POWER,RUN,FAULT,LOW BATTERY led came on. Is this normal?
When programer unpluged : POWER,RUN led indicated
ps. I've opened the PLC and checked battery status: 2.96VDC, is this ok?
Any comments or solutions from you will much appreciated
Please see pictures from below for my clear explaination
http://img.villagephotos.com/imageview.aspx?i=25814459
http://img.villagephotos.com/imageview.aspx?i=25814460
Last edited: