We have a pallet strech wrapper that has a Allen Bradley SLC 500 fixed PLC 1747-L40A, It was programmed years ago with ICOM Software.
Everything is fine but I want to download the program and install a eeprom as it only has the battery back-up.
We have RSlogix500, RSLinx and the PIC converter.
I have been afraid to even attempt to communicate with this because the software may not be compatable.
Question is: Can I extract the program using the RSLogix500 or is there going to be a problem being it was programmed with the ICOM software.
I do have a print-out of the program and it looks like standard RSLogix500 format, I could manually convert it to RSLogix.
Thanks....
Everything is fine but I want to download the program and install a eeprom as it only has the battery back-up.
We have RSlogix500, RSLinx and the PIC converter.
I have been afraid to even attempt to communicate with this because the software may not be compatable.
Question is: Can I extract the program using the RSLogix500 or is there going to be a problem being it was programmed with the ICOM software.
I do have a print-out of the program and it looks like standard RSLogix500 format, I could manually convert it to RSLogix.
Thanks....