BarryP
Member
Has anyone any examples of using the Comreqs of this PLC for changing the value of a B Type HSC to zero on command, e.g. when %M100 goes high.
The PLC is a IC200UAL006-AA version & I am using Versapro Vs2.01.
I already have the manual on this unit but the write-up is very inexplicit and a bit wishy washy.
Thanx in anticipation
The PLC is a IC200UAL006-AA version & I am using Versapro Vs2.01.
I already have the manual on this unit but the write-up is very inexplicit and a bit wishy washy.
Thanx in anticipation